AG308 Anti-Graffiti Adhesive Bond

Quadex® AG308 is a single component, air-drying, moisture-curing primer. AG308 is used to promote adhesion of the Quadex Anti-Graffiti Solution System coatings to a variety of substrates. It adheres to slick, non- porous surfaces that are typically difficult to bond.

Product Documents

Quadex® AG308 is a single component, air-drying, moisture-curing primer. AG308 is used to promote adhesion of the Quadex Anti-Graffiti Solution System coatings to a variety of substrates. It adheres to slick, non- porous surfaces that are typically difficult to bond.

Packaging

AG308 is packaged in gallon pails and quart containers.

Yield

AG308 will typically treat from 800-1,000 s/f per gallon, depending on the type and porosity of the surface to be coated. More porous surfaces will have a lower coverage rate.

Safety

Precautions should be taken to prevent eye contact as it may cause burns. If eye contact occurs, immediately flush eyes with lots of water and promptly obtain medical attention. Avoid prolonged or repeated skin contact as this may cause irritation. In case of skin contact, wash affected areas with water as soon as practical. Keep away from heat, sparks, and open flames. Use with adequate ventilation. Avoid prolonged breathing of vapors.

24 Hour Emergency Information:

Domestic Shipments and to Canada: 800-633-8253 International Shipments: 801-629-0667

X