AG307 Anti-Graffiti Primer

AG307 Anti-Graffiti Primer is a single component, water-based acrylic co-polymer, high performance Anti-Graffiti primer. It is the base coat used on substrates with the Quadex® Industrial Anti-Graffiti System Solution clear or pigmented Top Coats (AG100, AG101, AG102, AG202, AG201, AG202).

Product Documents

AG307 Anti-Graffiti Primer is a single component, water-based acrylic co-polymer, high performance Anti-Graffiti primer. It is the base coat used on substrates with the Quadex® Industrial Anti-Graffiti System Solution clear or pigmented Top Coats (AG100, AG101, AG102, AG202, AG201, AG202).

AG307 provides a pin-hole free surface and functions as a barrier coat to maintain the original look of the substrate. Do not rely on the AG100 or AG200 Top Coat to create the pinhole free surface.

Special Features

The use of AG307 Anti-Graffiti primer will insure the least amount of color change to the substrate. AG307 Anti-Graffiti Primer will also fill and build the substrate in the most efficient manner possible.

Limitations

Not recommended for below-grade. Not recommended for glass and some forms of plastics. Will not prevent water penetration through structural cracks or open joints.

Jobsite Preparation

Protect people, vehicles, property, foliage, and surfaces not to be coated and that may be subject to splash, fumes, and wind drift of product. Ensure fresh air entry and cross ventilation during application and drying process. Extinguish all flames, pilot lights and any other potential sources of ignition during the application and drying process.

Substrate Preparation

Substrate should be thoroughly dry, cleaned and free from dust, surface  dirt, oil, grease, and other contaminates that might prevent adhesion  of  coating. Freshly poured concrete  should be thoroughly cured 28 days before application. Sealants and caulking should be fully cured prior to application.

Air Temp

Surface and air temperatures should be 45-95°F during application.

Equipment

Airless sprayer to apply AG307 Anti-Graffiti Primer. Preferred tip size is 517. Use low pressure to create an efficient fan of material during application. Roller rig with proper sized nap depending on substrate to be coated.

Clean Up

Clean tools and equipment immediately after  use with clear cool water. Dispose  of  unused   product   and   container  in accordance with local, state, and federal regulations. No Dilution of AG307 Anti-Graffiti Primer, AG100/AG200 Top Coat, and AG308 – Quadex® Grip (Adhesion Promoter): Do not dilute or alter in any manner. Refer to mixing instructions.

Safety

Read SDS for precautionary instructions prior to use.

First Aid

Ingestion and Aspiration Hazard: If ingested, call a physician immediately. Do not induce vomiting or give anything by mouth. Only induce vomiting at the instruction of a physician. If vomiting occurs, keep head below waist to prevent entry  of liquid into lungs.

Eye Contact: Rinse eye thoroughly for 15 minutes. Get medical assistance if irritation persists.

Skin Contact: Rinse thoroughly with soap and water. Remove contaminated clothing and wash before reuse. Get medical attention if irritation persists.

Inhalation: Remove to fresh air and provide oxygen if breathing is difficult. Give artificial respiration if not breathing. Get immediate medical attention.

24 Hour Emergency Information: Domestic Shipments and to Canada: 800-633-8253

International Shipments: 801-629-0667

Warranty

10 to 30 year performance warranties available for Quadex Industrial Anti-Graffiti System Solutions Unlimited removals and no ghosting, staining, or shadowing. Contact Quadex LLC for full details and requirements.

X