AG100 Anti-Graffiti Top Coat – Gloss

AG100 and AG200 are high performance, permanent finish coatings that provide years of high resistance to UV degradation, stain, chemical, abrasion and other environmental influences. They also allow rainwater to remove dirt from the surface of the coatings, providing a self-cleaning effect on the protected structure.

Product Documents

The Quadex Anti-Graffiti System Solution offers a permanent, gloss or pigmented gloss coating system for graffiti control and general maintenance applications. This Anti-Graffiti System allows a property owner to maintain a graffiti, dirt, and stain-free environment over the useful life; “no re-coating” for 25-30 years.

AG100 and AG200 are high performance, permanent finish coatings that provide years of high resistance to UV degradation, stain, chemical, abrasion and other environmental influences. They also allow rainwater to remove dirt from the surface of the coatings, providing a self-cleaning effect on the protected structure.

Work Site Preparation

Protect people, vehicles, property, foliage, and surfaces that are not to be coated and that may be subject to splash, fumes, and wind drift of product. Ensure fresh air entry and cross ventilation during application and drying process. Extinguish all flames, pilot lights and any other potential sources of ignition during the application and drying process.

Substrate Preparation

Substrate should be thoroughly dry, cleaned and free from dust, surface dirt, oil, grease and other contaminates that might prevent adhesion of coating. New concrete should be thoroughly cured 28 days before application. Avoid “hot” “not cured” stucco. pH levels are to be neutral, below 9-10, prior to application of all Quadex® Industrial Anti-Graffiti products. Sealants and caulking should be fully cured prior to application.

Surface and Air Temperatures

Surface and air temperatures should be 45-95°F during application. Some specialized coatings should be applied in narrower temperature ranges.

Equipment

Airless sprayer to apply AG100 and AG200 Top Coat. Preferred tip size: 517. Use low pressure to create an efficient fan of material during application.

Roller rig with proper sized nap depending on substrate to be coated.

Pre-dampened roller.

Clean Up

Clean tools and equipment immediately after use with MEK or acetone as allowed by local regulations.

Return unused products per Manufacturer’s requirements. Dispose other materials and containers in accordance with local, state and federal regulations.

Dilution

Do not dilute. Refer to mixing instructions.

Safety

Quadex® Industrial Anti-Graffiti Top Coats are VOC Compliant, solvent borne products and may cause symptoms typical with organic solvent exposures, and are combustible. Read SDS for precautionary instructions prior to use.

First-Aid

Quadex® Industrial Anti-Graffiti Top Coats are VOC Compliant, solvent borne products and may cause symptoms typical with organic solvent exposures, and are combustible. Read SDS for precautionary instructions prior to use.

Ingestion and Aspiration Hazard: If ingested, call a physician immediately. Do not induce vomiting or give anything by mouth. Only induce vomiting at the instruction of a physician. If vomiting occurs, keep head below waist to prevent entry  of liquid into lungs.

Eye Contact: Rinse eye thoroughly for 15 minutes. Get medical assistance if irritation persists.

Skin Contact: Rinse thoroughly with soap and water. Remove contaminated clothing and wash before reuse. Get medical attention if irritation persists.

Inhalation: Remove to fresh air and provide oxygen if breathing is difficult. Give artificial respiration if not breathing. Get immediate medical attention.

24 Hour Emergency Information: Domestic Shipments and to Canada: 800-633-8253

International Shipments: 801-629-0667

X